Operator Belt (COBRA® IDR 1.75")

As low as $198.00
SKU
31OV
The Operator COBRA® IDR 1.75" Rigger Belt is a low-profile shooter's belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.

• Built with two layers of military-grade Type 13 nylon webbing
• Sewn together with five rows of lock-stitched, bonded 138 nylon thread
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5" webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5" webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator's interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish

*Use actual measurements and not pant size when picking your belt size*

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Small – 29"-31"
Medium – 32"-34"
Large – 35"-37"
XL – 40"-42"
2X – 44"-46"
3X – 48"-50"


This product is member tested and recommended by the National Tactical Officers Association (NTOA).

Covered by HSGI's® Lifetime Warranty. Made in the USA.


**HSGI's® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
*Use actual measurements and not pant size when picking your belt size*

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Small – 29"-31"
Medium – 32"-34"
Large – 35"-37"
XL – 40"-42"
2X – 44"-46"
3X – 48"-50"

Find your size - US

Product
Size
Waist(in) 

S 29" - 31"

M 32" - 34"

L 35" - 37"

XL 40" - 42"

XL 44" - 46"

XL 48" - 50"

How to measure

Men Bottom
  • Waist

    Measure around the narrowest part of the waist, keeping the tape horizontal.

  • Hips

    Measure around the fullest part of your hips, keeping the tape horizontal.

  • Inseam

    Measure from your crotch to the bottom of your leg. Be aware that the inseam measurments are based on a regular inseam.

Write Your Own Review
You're reviewing:Operator Belt (COBRA® IDR 1.75")
Attachments